Want to add a derma stamp for face routine but don’t know where to start? A derma stamp is an easy-to-use skincare tool, but like any skincare device, you must use it as instructed.
Proper technique and a high-quality derma stamp can deliver great results. Understanding how often to use it and what to do afterward helps you achieve rejuvenated, glowing skin.
Begin your journey with our simple yet detailed guide.
What is a Derma Stamp for Face?
Compact cosmetic tools equipped with around 117 microneedles. The needles are medical-grade stainless steel or titanium. These microneedles stimulate the skin’s natural collagen production while enhancing the absorption of skincare products.
Some models have an adjustable needle option, while others come with a fixed needle size and a protective cap for safe storage after use.
What is a Derma Stamp Used For?
- Boost the skin’s natural collagen production by up to 1,000% for a firmer and more youthful-looking skin.
- Break down old, misaligned collagen in scars and replace it with a smoother, more even layer.
- Improves the absorption of certain skincare and hair restoration products by up to 10,000 times.
- Focus on a specific region in the face.
- Easy to control the pressure when applying it to the skin.
The Guide
Carefully follow these steps to prevent risks and infections.
Keep in mind that the following guidelines are broadly applicable, but results may vary. Factors such as needle length, penetration depth, and the number of passes can all affect how you use the tool and what effects it has.
How to Choose a Needle Size
The size refers to the length of its microneedles. 0.25mm needles are well-suited for most facial applications, while 1.0mm needles are more effective for treating scars and stimulating the scalp.
|
Skin Concern |
Needle Size |
|
Enlarged pores |
0.25–0.5 mm |
|
Postinflammatory hyperpigmentation |
0.25–0.5 mm |
|
Skin discoloration |
0.25–1.0 mm (start with the smallest) |
|
Sun damaged or sagging skin |
0.5–1.5 mm (a combination of both is ideal) |
|
Uneven skin tone or texture |
0.5 mm |
|
Wrinkles |
0.5–1.5 mm |
Application
Step 1: Sanitize Your Derma Stamp
Soak in 70% isopropyl alcohol for 5 to 10 minutes to properly disinfect it before use.
Step 2: Cleanse Your Face
Wash your face thoroughly with a gentle, pH-balanced cleanser to remove dirt and oil. If you're using needles longer than 0.5mm, wipe your face with 70% isopropyl alcohol before beginning.
Step 3: Apply Numbing Cream (If Necessary)
If you have a low pain tolerance, you may want to use a numbing cream, especially for needle lengths over 1.0mm, as these can cause pinpoint bleeding.
Follow the manufacturer's instructions when applying numbing cream, and completely wipe off before you start stamping.
Step 4: Stamping
Apply it to the skin using a vertical or crisscross pattern, pressing gently. Repeat the stamping motion up to 10 times per area. Target the desired spots without excessive focus on a single location.
Stamping focuses on smaller, precise areas, whereas rollers are better suited for addressing larger skin concerns.
Step 5: Wash or Not Wash
Some people prefer to wash their face after microneedling. If you choose to do so, use only water. Otherwise, wait at least six hours before cleansing.
Step 6: Clean Your Derma Stamp
Wash using an unscented detergent. Fill a plastic container with soapy water and swirl around carefully. Avoid contact with the sides.
Use detergents immediately after microneedling because alcohol alone does not dissolve proteins from skin and blood.
Step 7: Disinfect and Store
After cleaning, soak in 70% isopropyl alcohol for 10 minutes to fully disinfect it. Once dry, place it back in its protective case and store it in a safe, clean area.
After Care Treatment
Wait 24 hours before reintroducing skincare products. This waiting period allows the tiny wounds to start healing and reduces the risk of infection and excessive product absorption into sensitive skin.
- For the first day, cleanse your face with a gentle, non-foaming cleanser to remove impurities without disrupting the skin’s barrier.
- Use a light moisturizer if needed, but avoid exfoliants, creams, or masks during this initial period, as they could irritate the skin and affect results.
The only serum you can apply is hyaluronic acid serum, as it won’t cause irritation or penetrate too deeply. Avoid ingredients like vitamin C and retinol for at least 24 hours to allow the skin to begin its natural healing process.
What to Expect After Microneedling
Immediately after microneedling, the skin may appear red for a few hours (sometimes less) and feel similar to a mild sunburn. There may be slight swelling, and you might notice a pulsing sensation as blood circulation increases.
You may also experience mild redness (erythema) for 2–3 days, and some peeling might occur. If your skin starts to shed, resist the urge to pick at it. The peeling will naturally resolve on its own.
With consistent microneedling sessions, you can achieve long-term improvements in skin texture and tone.
Conclusion
Derma stamping is an innovative skincare practice with multiple benefits but only when used correctly. Using a derma stamp for face before and after will make a huge difference. Just follow proper instructions and avoid excessive use.
To achieve the best results, allow enough time between sessions for your skin to fully heal before the next treatment with Aither Beauty Derma Stamp.
Frequently Asked Questions
Does derma stamp really work?
It does. The device stimulates collagen and elastin production by creating tiny micro-injuries in the skin.
Collagen is the most abundant protein in the human body and maintains the skin's structure. The production of this protein naturally declines by about 1% per year after age 25. Reduction in collagen leads to signs of aging—fine lines, wrinkles, and loss of elasticity.
Regular microneedling can help counteract this process by boosting collagen renewal and promoting healthier, more radiant skin.
Where to buy derma stamp?
The quickest way to purchase is through a brand's official website or a trusted marketplace like Amazon. You can get our derma stamps directly at AitherBeauty.com or find them on Amazon.
How often should you use a derma stamp for face?
The frequency depends on the needle length. Below are the maximum recommended usage guidelines, but always listen to your skin and see if it has fully healed before your next session:
- 0.25 mm – Every other day or twice a week
- 0.5 mm – 1 to 3 times per week
- 1.0 mm – Every 10 to 14 days
- 1.5 mm – Once every 3 to 4 weeks
- 2.0 mm – Every 6 weeks (not recommended for home use)